Stick Frosted Logo Customized Glass Wall Partition With Solid Door Equipment Belt For Accessories

Product Description

If you need to apply frosted paper on the glass partition, you can follow the steps below:

• Prepare tools: ruler, scissors or utility knife, wet towel, scraper;
• Measure the size: use a ruler and utility knife or scissors to cut the film into the size of each position to be applied;
• Cleaning the glass: clean the place where the film is to be applied with a towel, and then spray the glass surface with a spray bottle;
• Paste the film: peel off the backing paper of the frosted glass film, apply it to the place where it is to be applied, align the edges and corners, and make it flat. Use a wet towel to level the surface while applying, and wipe out the air and moisture between the glass and the film (inside) (if the frosted film ratio is very large, do not remove the bottom paper completely, you can remove the bottom paper while applying);
• Scrape off bubbles: After leveling, remove most of the air and moisture, and then use a scraper to scrape out all the air, bubbles, and moisture. Don't use too much force, as long as you can scrape out all the moisture and air;
• Dry the moisture: After drying the moisture, wait for 12-24 hours (the time depends on the weather, 12-24 is sunny) without cleaning or moving.

In addition, when applying frosted paper, you need to pay attention to the following points:

If you want a style that can be adjusted to be transparent or opaque, we also have switchable glass available

The working principle of dimming glass is mainly based on the following aspects:
Dimming glass is usually composed of a layer of liquid crystal film (polymer dispersed liquid crystal) sandwiched between two pieces of glass.
When the power is off, the liquid crystal molecules are arranged in disorder, and the light cannot pass through normally, and the glass appears opaque; when the dimming glass is powered on, the liquid crystal molecules are arranged in order under the action of the electric field, so that the light can penetrate, and the glass becomes transparent. By controlling the on and off of the power supply, the glass can be easily switched between transparent and opaque states. The realization of this dimming function mainly depends on the change of the scattering and transmission characteristics of the liquid crystal molecules to the light, so as to achieve the effect of adjusting the light transmittance and transparency.

Another more cost-effective style is the blinds

Louvered glass partitions are also called glass partitions and stainless steel partitions. The main function is to use glass as partition walls to divide the space according to needs, making better use of the space to meet various home and office uses. Louvered partition walls usually use tempered glass, which has the advantages of wind pressure resistance, cold and heat resistance, impact resistance, etc., so it is safer, stronger and more durable. There is also much less harm to the human body after the glass is broken than ordinary glass. There are three types of materials: single layer, double layer and. Of course everything is done according to customer needs.

What materials are needed for the installation and matching of blind glass partitions? 1.: It mainly includes door handles, hinges, door locks, floor springs, push handles, pulleys, tracks, door suckers, etc. 2. Frame material: Aluminum-magnesium alloy, aluminum alloy, broken bridge aluminum, stainless steel, wood art, plastic steel, etc. are all commonly used materials for shutter glass partition frames. 3. Wall materials: mainly include tempered, double-layer glass, single-layer glass, blinds, wallpaper, film paper, non-woven fabrics, etc. 4. Sealing material: When constructing louvered glass partitions, sealing rubber strips and waterproof sealants should be used to seal the gaps.